EN
20V AIR COMPRESSOR
USER’S MANUAL
17
To use the sport ball needle:
Insert sport ball needle into sports ball valve and infl ate.
Remove sport ball needle after infl ation.
NOTE:
Pressure required for most sports balls is too low for accurate reading on gauge.
The Presta valve adaptor can be used for Presta valve stems as described below. (See Figure 11). Before infl ating
a tire with a Presta valve, loosen the locking nut on the valve stem to infl ate. Once infl ation is complete, tighten the
locking nut to seal the tire valve.
To use the Presta valve adaptor:
Loosen Presta valve locking nut.
Thread Presta valve adaptor onto valve stem with larger open end toward wheel.
Position the air chuck clamp in the unlock position.
Clamp the end of the air chuck down onto the Presta valve adaptor by pressing air chuck clamp down until it
locks into place.
After infl ation, remove air chuck and tighten locking nut.
ACCESSORIES STORAGE
See Figure 14.
When not in use, adaptors and needles provided with the infl ator can be placed in the storage area located on
the right side of the tool.
HOSE STORAGE
See Figures 14–15.
When not in use, the hoses provided with the infl ator can be placed in the storage areas located on both sides of
the infl ator.
OPERATION
