manualshive.com logo in svg

Fido FireBrick FB2700, User Manual, Page: 238 / 264

Share
Download
Fido FireBrick FB2700 User Manual Download Page 238

Configuration Objects

217

override

shaper-override

Optional, unlimited

Profile specific variations on main settings

K.2.63. shaper-override: Traffic shaper override based
on profile

Settings for a named traffic shaper

Table K.87. shaper-override: Attributes

Attribute

Type

Default

Description

comment

string

-

Comment

profile

NMTOKEN

Not optional

Profile name

rx

unsignedInt

-

Rx rate limit/target (b/s)

rx-max

unsignedInt

-

Rx rate limit max

rx-min

unsignedInt

-

Rx rate limit min

rx-min-burst

duration

-

Rx minimum allowed burst time

rx-step

unsignedInt

-

Rx rate reduction per hour

source

string

-

Source  of  data,  used  in  automated  config
management

tx

unsignedInt

-

Tx rate limit/target (b/s)

tx-max

unsignedInt

-

Tx rate limit max

tx-min

unsignedInt

-

Tx rate limit min

tx-min-burst

duration

-

Tx minimum allowed burst time

tx-step

unsignedInt

-

Tx rate reduction per hour

K.2.64. ip-group: IP Group

Named IP group

Table K.88. ip-group: Attributes

Attribute

Type

Default

Description

comment

string

-

Comment

ip

List of  IPRange

-

One or more IP ranges or IP/len

name

string

Not optional

Name

source

string

-

Source  of  data,  used  in  automated  config
management

users

List of  NMTOKEN -

Include IP of (time limited) logged in web
users

K.2.65. route-override: Routing override rules

Routing override rules

Table K.89. route-override: Attributes

Attribute

Type

Default

Description

Summary of Contents for FireBrick FB2700









































































































































































































































































Reviews:

No comments