Fido FireBrick FB2700 User Manual Download Page 232

Page: 232 / 264

Configuration Objects

211

peer-certlist

List of NMTOKEN accept any suitable

Certificate trust anchor(s) acceptable for
authenticating peer

peer-secret

Secret

use secret

shared secret used to authenticate peer

peer-ts

List of IPRange

Allow any

Valid

outgoing-destination/incoming-

source IPs for tunnelled traffic

peer-ts-from-routes

boolean

false

Send traffic selector based on routing

query-eap-id

boolean

true

Query client for EAP identity

roaming-pool

NMTOKEN

IKE roaming IP pool

secret

Secret

shared secret used to authenticate self to
peer

Table K.72. ike-connection: Elements

Element

Type

Instances

Description

route

ipsec-route

Optional, unlimited

Routes to apply to tunnel when up

K.2.52. ipsec-route: IPsec tunnel routes

Routes for prefixes that are sent to the IPsec tunnel

Table K.73. ipsec-route: Attributes

Attribute

Type

Default

Description

bgp

bgpmode

Not announced

BGP announce mode for routes

comment

string

Comment

List of IPPrefix

Not optional

One or more network prefixes

localpref

unsignedInt

4294967295

Localpref of network (highest wins)

name

string

Name

ospf

boolean

true

OSPF announce mode for route

profile

NMTOKEN

Profile name

source

string

Source of data, used in automated config
management

K.2.53. ike-roaming: IKE roaming IP pools

Pool of IP addresses and associated DNS/NBNS servers for dynamic IP allocation

Table K.74. ike-roaming: Attributes

Attribute

Type

Default

Description

DNS

List of IPAddr

List of DNS servers available to clients

NBNS

List of IPAddr

List of NetBios name servers available to
clients

comment

string

Comment

List of IPRange

Not optional

List of IP ranges for allocation to road-
warrior clients

name

NMTOKEN

Not optional

Name

Summary of Contents for FireBrick FB2700








































































































































































































































































Search results

Summary of Contents for FireBrick FB2700

Reviews:

Fido FireBrick FB2700, User Manual, Page: 232 / 264

Search results

Summary of Contents for FireBrick FB2700

Reviews: