Home
/
Fido
/
FireBrick FB2700
/
User Manual

Fido FireBrick FB2700, User Manual, Page: 194 / 264

Share

Page: 194 / 264

Fido FireBrick FB2700 User Manual Download Page 194

Constant Quality Monitoring

- technical details

173

and xml list of all graphs. This total is done by multiplying the last score by 864, the previous by 863, and so
on for the previous 24 hours.

J.6. Creating graphs, and graph names

Graph names are text and up to 20 characters. Only letters, numbers, @, -, and . are allowed. All other characters
are removed. It is recommended that names complying with this are used. Any graph name that you try and use
that is too long will be replaced with one that uses part of the name and a hash to try and ensure a consistent
unique graph name is applied.

Graphs can be defined in some configuration settings such as interface names.

Graphs can also be created dynamically in some cases, e.g. L2TP based graphs are made based on the
Chargeable-User-Id, Calling-Station-Id or User-Name for a connected line, and so can be defined from the
RADIUS authentication response. It is recommended that the circuit ID is used where available, e.g. from BT
platform RADIUS.

Whilst the FB2700 can manage thousands of graphs, new graphs will not be greated if memory is not available.

«
...
192
193
194
195
196
...
»

Summary of Contents for FireBrick FB2700









































































































































































































































































Reviews:

No comments