9
.
www.fidelissecurity.com
Copyright © 2022 Fidelis Cybersecurity
®
, Inc. All rights reserved
8. Configure the network parameters for the system and each active network interface.
‒
Use the Network Configuration table you prepared earlier (
‒
When complete, return to the top menu.
9. When complete, select
OK
to leave Setup.
10. From the command line, reboot the system:
sudo /fss/bin/shutdown.pl --user admin --reboot
8. Fidelis Network Integration
Register Collector SA with CommandPost
1. From the CommandPost user interface, navigate to:
Administration > Components
2. Click
Add Component
.
3. Fill in the Add New Component popup:
Component Type
Select
Collector
Name
Specify a “friendly” name for the Collector SA. This is
not
the fully
qualified domain name of the Collector SA.
Description
Optionally, specify a description, for example, a location, business unit,
etc.
IP Address
Specify the IP address of the Admin interface of the Collector SA
appliance.
4. Click
Add Component
.
5. To register the Collector SA, click the and select
Register
.
Accept the End User License Agreement (EULA). The CommandPost begins communicating with
the Collector SA at the specified IP address.
