Fidelis Network Collector SA Page 8 Quick Start Manual Download

Page: 8 / 13

www.fidelissecurity.com

2. With

Perform Initial Install or Factory Reset

selected, press Enter.

3. Use the Up and Down arrow keys to select Collector SA, and press Enter. If you need help

determining the system type, see

Appendix C

The system displays a screen with the message

Congratulations, your CentOS installation is

complete

. The system will automatically reboot.

4. Directly attach an ethernet cable from a client system such as a laptop to the Admin/eth0 port on

the appliance. The default IP address is 192.168.42.11/24. Assign a static IP from the same
subnet to the network interface on the client system and connect to the appliance using SSH.

5. Use the following credentials at the login prompt. You will be required to change the password

immediately.

‒

user:

fidelis

‒

default password:

fidelispass

6. From the command line, run:

sudo /FSS/bin/setup

You will be prompted for the fidelis password.

7. With Setup, select

Network Settings

Summary of Contents for Network Collector SA














Search results

Summary of Contents for Network Collector SA

Reviews:

Related manuals for Network Collector SA

Brands by name

Popular brands

Fidelis Network Collector SA, Quick Start Manual

Search results

Summary of Contents for Network Collector SA

Reviews:

Related manuals for Network Collector SA

Brands by name

Popular brands