3 - 17
BIOS Setup
Time (hh:mm:ss) Alarm
If an ATX power supply is installed and when RTC Alarm Resume is En-
abled, this feature allows you to set the time of the alarm starts when the
RTC Alarm Resume From Soft Off is set to be Enabled.
The options are: hh (
hour
) - 0, 1, 2,.., 23; mm (
minute
) - 0, 1, 2,..,59; ss
(
second
) - 0, 1, 2,..,59.
Primary IDE 1
When the primary slave HDD is working, the system timer will be reloaded
and the system will not be into the suspend mode.
The options are: Disabled, Enabled.
Secondary IDE 0
When the secondary master HDD is working, the system timer will be
reloaded and the system will not be into the suspend mode.
The options are: Disabled, Enabled.
Secondary IDE 1
When the secondar slave HDD is working, the system timer will be re-
loaded and the system will not be into the suspend mode.
The options are: Disabled, Enabled.
Primary IDE 0
When the primary master HDD is working, the system timer will be re-
loaded and the system will not be into the suspend mode.
The options are: Disabled , Enabled.
FDD, COM, LPT Port
When FDD, COM, or LPT is working, the system timer will be reloaded and
the system will not be into the suspend mode.
The options are: Disabled, Enabled.
PCI PIRQ[A-D]#
When the PCI PIRQ[A-D]# has been alerted, the system timer will be re-
loaded and the system will not be into the suspend mode.
The options are: Disabled, Enabled.