manualshive.com logo in svg

FIC 1stMainboard VC15, Manual, Page: 37 / 48

Share
Download
FIC 1stMainboard VC15 Manual Download Page 37

3 - 11

BIOS Setup

USB Controller

Disable this option if you are not using the onboard USB feature.

The options are: Disabled, Enabled.

USB Keyboard Support

When a USB keyboard is installed, please set at Enabled.

The options are: Disabled, Enabled.

USB Mouse Support

When a USB mouse is installed, please set at Enabled.

The options are: Disabled, Enabled.

IDE Secondary Master 

UDMA

Allows an automatic configuration of the PCI secondary IDE hard drive

(master) mode if Ultra DMA is supported both on the motherboard and

the hard disk. The options are: Auto, Disabled.

Init Display First

When you install an AGP VGA card and a PCI VGA card on the board, this

feature allows you to select the first initiation of the monitor display from

which card. The options are: PCI Slot, AGP.

IDE HDD Block Mode

When enabled, the system executes read/write requests to hard disk in

block mode. The options are: Enabled, Disabled.

AC97 Audio

This feature auto detects if you use an AMR card that with a CODEC to

enable or disable the AC97 audio function.

The options are: Auto, Disabled.

AC97 Modem

This feature auto detects if you use an AMR card that with a CODEC to

enable or disable the AC97 modem function.

The options are: Auto, Disabled.

IDE Secondary Slave 

UDMA

Allows an automatic configuration of the PCI secondary IDE hard drive

(slave) mode if Ultra DMA is supported both on the motherboard and the

hard disk. The options are: Auto, Disabled.

Summary of Contents for 1stMainboard VC15

















































Reviews:

No comments