2 - 5
Installation Procedures
Clear Password: JP1
This jumper allows you to enable or disable the password configuration. You
may need to enable it if you forget your password. To clear the password
setting: (1) Turn off your computer. (2) Move the jumper cap pinpair 2-3. (3)
Turn on your computer. (4) Hold down the
Delete
key during bootup and enter
BIOS Setup to re-enter user preferences. (5) Turn off your computer, (6) Re-
move the jumper cap to disable this function. (7) Turn on your computer for
the new settings to take effect.
Clear CMOS: JP1
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Turn off your computer. (2) Place the jumper cap onto the pinpair
1-2 to clear CMOS. (3) Turn on your computer until
CMOS checksum error
appears. (4) Turn off your computer. (5) Take off the jumper cap to disable it.
(6) Turn on your computer. (7) Hold down the
Delete
key when boots. (8) Enter
the BIOS Setup to re-enter user preferences.