6
Pre-Installation (continued)
□
For line applications, subtract 3/8 in. from the measurement on each end to allow for rail brackets and flanges. For stair
applications, subtract 1/8 in. from the measurement on each end to allow for stair brackets. Transfer the measurement to the top
rail, making sure that the distance from the end of the rail to the first baluster slot is equal on both ends of the rail. The minimum
distance from a post to first baluster slot is 2 in. for clearance from the brackets (See Fig. 3).
2 in.
Fig. 3
□
Place the rails together so that the top and bottom baluster slots are aligned. Mark the bottom rail for the inside distance between
the posts and rail brackets (see Fig. 4). Cut the top and bottom rails to fit between the posts and rail brackets.
Fig. 4
Top
Bottom