FS71C-85 Series User Manual
|
20
Copyright © 2015 Fiber-Span
De-rating Table
After the downlink gain and the output composite pow-
er are set, the power-per-channel must be measured to
ensure that the downlink signal level is a high enough
at the RF Output port and is suffi cient to provide the
desired coverage.
The table at right summarizes the power-per-channel
de-rating requirements for FM type modulation
schemes.
HRU Derating Table
No. of RF Channels
Power per Channel (FM), (dBm)
1
37
2
34
4
31
8
28
DHRU Uplink Control
The DHRU Uplink control and monitoring gives the
user the ability to change the gain and set parameters
for uplink path optimization.
The settings and diagnostics can be implemented via
the local USB port. See
Figure 14
.
