FS71C-85
Series
User
M anual
|
25
Copyright
©
2015
Fiber-Span
“Changes or modifi cations not expressly approved by
the manufacturer could “Void” the user’s authority to
operate the equipment”.
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions manual, may cause
8
FCC Statement
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at their
own expense.
Th
e maximum downlink antenna gain must not exceed
4.85 dBd and the cable loss from DAS port to antenna
must not be less than 5 dB. The maximum uplink
antenna gain must not exceed -2.15 dBd. The antenna(s)
used for this
device
must be installed to provide
a
sep-
aration distance of at least 100 cm from nearby persons.
Manufacturer’s Notes
To improve and/or correct equipment performance the
following can be performed.
1. Re-orient or relocate the receiving antenna.
2. Increase the separation between the equipment
and receiver.
3. Connect the equipment into an outlet on a dif-
ferent circuit from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/RF
technician for help.
