FS71C-85 Series User Manual
|
10
Copyright © 2015 Fiber-Span
Figure 8: DHRU Settings and Alarms Status GUI Interface
GUI Interface
A GUI Interface is available for use in DHRU setup and
confi guration management. This includes initial con-
fi guration of channel frequencies and fi lter bandwidths,
a well as Alarm Monitoring and Control functions.
The GUI software runs on a separate PC, which is con-
nected to the DHRU via USB cable attached to the USB
port on the front panel. The Alarms screen is shown in
Figure 8
below.
The device interface is set up by choosing the
COM
port
for communications and selecting a device name.
• PA Current 1 (UpLink)
• PA Current 2 (DownLink)
• Power Supply Voltage
Local
Discrete reported Alarms are as follows:
