28
Each status report includes the same basic information as shown in this sample:
<DeviceName>CUSTOMNAME</DeviceName>
- this tag indicates the name of the APU and
must correspond with the actual device name. The notation
HZONE-X
and
ZONE-X
indicate the
affected hyperzone and zone.
<DeviceState>Secure</DeviceState>
- the status of the APU
<Update Time Zone=”GMT”>2007-10-08T15:12:24.000</UpdateTime>
- the time (with time
zone) that the change of state occurred.
APU configuration parameters
Some APU configuration parameters can be changed via XML communication. For example,
these may include the gain, the wind reject factor, and turning wind processing on and off. Refer
to the APU manual for full descriptions of the adjustable parameters.
Device configuration documents, shown on the following page, are generated by the user and
sent to the APU via the network. In this sample, the three calibration parameters are being set.