- 12 -
▶
Preheat Mode
It is performed for reducing heating time and rapid heating task. When it comes to turned
on program, red LED keeps blinking which means it is warming up the heater about 120 to
160
℃
itself. After a few minutes, it is avaiable to shrink the sleeve in 15 seconds (Refer to
60mm sleeve which used to perform in 20 seconds)
However, Please be attention, it wastes more the battery power than Normal heating
mode. (Normal Cycle is approximately 400, whereas, it performs 295 cycle)
Summary of Contents for Mini5C
Page 25: ... 25 ...
Page 33: ... 33 ...
