background image

30.08.2019

manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGWDEU-111

manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGWDEU-111

4/15

1. Insert the device with mounting frame into the mounting box and secure with mounting claws and screws.
2. Snap the cover plate to the device.
3. Snap the switch button to the device.

Gira Cover:

1. Insert the device with mounting frame into the mounting box and secure with mounting claws and screws.
2. Snap the new cover plate to the device.
3. Snap the switch button adapter* to the device.
4. Snap the new switch button to the device.

Legrand Cover:

1. Insert the device with mounting frame* into the mounting box and secure with mounting claws and screws.
2. Snap the switch button adapter* to the device.
3. Snap the new inner cover plate to the device.
4. Snap the new outer cover plate to the device.
5. Snap the new switch button to the device.

Schneider Cover:

1. Insert the device with mounting frame* into the mounting box and secure with mounting claws and screws.
2. Snap the new cover plate to the device.
3. Snap the new switch button to the device

Parts compatibility

An overview can be found in the manufacturer s manual: 

https://manuals.fibaro.com/walli-dimmer/

 

 
 

Summary of Contents for FIBEFGWDEU-111
















Reviews: