Fiat TALENTO, Owner'S Handbook Manual

Page: 152 / 240

From the outside, pull out the light
cluster and reach bulb 11 fig. 250.
Bayonet light bulb P 21W.
Number plate lights
The bulb can be reached in the same
way as in vehicles with swing doors as
for tailgate.
Remove the lens 12 fig. 252 (using a
screwdriver).
Remove the cover to access the bulb.
Types of bulbs: W5W.
WARNING
163)
Modifications or repairs to the electric
system that are not carried out properly or
do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
164)
Halogen bulbs contain pressurised
gas, in the case of breakage they may
burst causing glass fragments to be
projected outwards.
165)
Only replace bulbs when the engine is
off. Also ensure that the engine is cold,
RISK OF BURNS!
166)
When you intervene near the engine,
this last could be hot. Moreover, the
cooling fan could start up at any time. The
warning light in the engine compartment
serves to remind you of this condition. Risk
of injury.
167)
Always turn off the ignition device
before working in the engine compartment
(refer to the “The keys” paragraph in the
“Knowing your vehicle” chapter).
IMPORTANT
28)
Halogen bulbs must be handled
holding the metallic part only. Touching the
transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
of the bulb. In the event of accidental
contact, wipe the bulb with a cloth
moistened with alcohol and let the bulb dry.
249
T36683
250
T36684
252
T38814
150
IN
AN
EMERGENCY