Fiat TALENTO Owner'S Handbook Manual Download Page 127

Page: 127 / 240

Combi/bus 9 seats

Seat not authorised to install a child restraint of this type.

ISOFIX system fastened child seat

Seat where installing an ISOFIX of child seat is allowed.

The rear seats have an anchorage that allows an ISOFIX universal child seat to be installed facing backwards. The

anchorages are available in the luggage compartment and are visible.
An ISOFIX child restraint system's dimensions are indicated by a letter:

A, B and B1: for seats facing forwards in group 1 (from 9 to 18 kg);

C: seats facing backwards in group 1 (from 9 to 18 kg);

D and E: seats facing backwards in group 0 or 0+ (less than 13 kg);
F and G: cots from group 0 (less than 10 kg).

205

T36639

125

Summary of Contents for TALENTO

















































































































































































































































Search results

Summary of Contents for TALENTO

Reviews:

Related manuals for TALENTO

Brands by name

Popular brands

Fiat TALENTO, Owner'S Handbook Manual

Search results

Summary of Contents for TALENTO

Reviews:

Related manuals for TALENTO

Brands by name

Popular brands