manualshive.com logo in svg

Fiat PUNTO 2012, Owner'S Handbook Manual

The Fiat PUNTO 2012 Owner's Handbook Manual is an essential guide for owners. This comprehensive manual provides detailed instructions and information on the vehicle's features, maintenance, and troubleshooting. Download it for free at manualshive.com to ensure you have all the necessary information to maximize your Fiat PUNTO 2012 experience.

Share
Download
background image

170

KNOWING 

YOUR 

VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

SERVICING 

AND CARE

TECHNICAL 

SPECIFICATIONS

CONTENTS

IMPORTANT Do not continue driving with one or more
flat tyres as handling may be compromised. Stop the car,
avoiding harsh braking or steering manoeuvres. Replace
the wheel immediately with the small spare wheel (for ver-
sions/markets where provided) or carry out a repair us-
ing the dedicated kit (see “Changing a wheel” in the “In
an emergency” section) and contact a Fiat Dealership as
soon as possible.

Tyre pressure unsuitable for speed

Should you need to travel at a speed higher than 160 km/h,
inflate the tyres to the pressures specified in “Tyre pres-
sures”.
If the TPMS system (for versions/markets where provid-
ed) detects that the pressure of one or more tyres is un-
suitable for the current speed, the warning light will turn
on (together with the message on the display) (see “Tyre
pressure low” in this section) and it will stay on until the
car slows down to a speed below the preset threshold.

IMPORTANT In this case, slow down immediately because
tyre overheating could damage tyre performance and dura-
bility beyond repair, and may even make the tyre explode.

CHECK TYRE PRESSURE 

(amber)

TYRE PRESSURE LOW (amber)

TYRE PRESSURE UNSUITABLE FOR
SPEED 

(amber)

(for versions/markets where provided)

When the ignition key is moved to MAR position, the
warnintg light turns on but should go off after a few sec-
onds.  

Check tyre pressures 

The warning light turns on to indicate the flat tyre. Should
two or more tyres be flat, the display will show the indi-
cations corresponding to each tyre in sequence.
Restore correct tyre pressures as soon as possible (see
“Cold tyre pressures” in the “Technical specifications” sec-
tion).

Tyre pressure low 

The warning light on the panel comes on when the pres-
sure of one or more tyres falls below a preset level. In this
way, the TPMS system warns the driver that one or more
tyres may be dangerously flat and probably punctured.

n

159-172 PUNTO EASY GB 1ed  03/09/13  11.39  Pagina 170

Summary of Contents for PUNTO 2012
















































































































































































































































































Reviews:

No comments

Related manuals for PUNTO 2012

K&M 8494 Installation Manual preview
8494
Brand: K&M Pages: 3
Westin 23-3130 Instructions preview
23-3130
Brand: Westin Pages: 3
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
Marlon Xplore Pro II SxS Owner’S Manual Assembly & Installation Instructions preview
Xplore Pro II SxS
Brand: Marlon Pages: 15
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
Connects2 adaptiv mini ADVM-BM1 Fitting & User Manual preview
adaptiv mini ADVM-BM1
Brand: Connects2 Pages: 4
FALCON RIDGE HU-4421-XL-SDK01 Instructions For Installation And Care preview
HU-4421-XL-SDK01
Brand: FALCON RIDGE Pages: 5
Unex OBU-352EC Quick Start Manual preview
OBU-352EC
Brand: Unex Pages: 30
THIEYE CarView 2 User Manual preview
CarView 2
Brand: THIEYE Pages: 88
TAUBENREUTHER 16-5911 Manual preview
16-5911
Brand: TAUBENREUTHER Pages: 18
Mercedes-Benz Vito Taxi 2011 Operation Manual preview
Vito Taxi 2011
Brand: Mercedes-Benz Pages: 10
Smappee EVB-1332-BL-E Installation Manual preview
EVB-1332-BL-E
Brand: Smappee Pages: 28
Tesla Gen 3 Manual preview
Gen 3
Brand: Tesla Pages: 42
Edelbrock 4789 Installation Instructions preview
4789
Brand: Edelbrock Pages: 2
Cadillac 1967 Calais Coupe Data Book preview
1967 Calais Coupe
Brand: Cadillac Pages: 255
Monster iCarPlay Direct Connect 2000 User Manual & Warranty Information preview
iCarPlay Direct Connect 2000
Brand: Monster Pages: 66

Brands by name

Popular brands

Load more brands