29
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
If the distance unit set is “mi” the fuel consumption unit
will be displayed in “mpg”.
– press
+
or
–
to make your choice;
–
if selecting “Temperature”
: briefly press MENU ESC and
the display will show “°C” or “°F” (depending on the pre-
vious setting);
– press
+
or
–
to make your choice.
When you have made the required adjustments, briefly
press MENU ESC to go back to the submenu screen or
hold the button down to go back to the main menu screen
without saving.
– hold down MENU ESC again to go back to the standard
screen or main menu, depending on which point in the
menu you have reached.
MEASUREMENT UNITS
(Setting measurement units)
With this function it is possible to set the measurement
units through three sub-menus: “Distance”, “Consump-
tion” and “Temperature”.
To set the desired measurement unit, proceed as follows:
– briefly press MENU ESC to display the three submenus;
– press
+
or
–
to switch between the three sub-menus;
– once the submenu to be modified has been selected, briefly
press the MENU ESC button;
–
if selecting “Distance”
: briefly press MENU ESC and the
display will show “km” or “mi” (depending on the previ-
ous setting);
– press
+
or
–
to make your choice;
–
if selecting “Consumption”
: briefly press MENU ESC and
the display will show “km/l”, “l/100km” or “mpg” (de-
pending on the previous setting);
If the set distance unit is “km”, you can set the fuel con-
sumption unit to km/l or l/100km depending on the
amount of fuel consumed.
001-032 PUNTO EASY GB 1ed 31/03/14 10:14 Pagina 29
