manualshive.com logo in svg

Fiat PUNTO 2012, Owner'S Handbook Manual

The Fiat PUNTO 2012 Owner's Handbook Manual is an essential guide for owners. This comprehensive manual provides detailed instructions and information on the vehicle's features, maintenance, and troubleshooting. Download it for free at manualshive.com to ensure you have all the necessary information to maximize your Fiat PUNTO 2012 experience.

Share
Download
background image

INTERIOR

Check regularly that water is not trapped under the mats
(due to drops from shoes, umbrellas, etc.), as this could
cause the sheet metal to rust.

232

KNOWING 

YOUR 

VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

SERVICING 

AND CARE

TECHNICAL 

SPECIFICATIONS

CONTENTS

Never use flammable products, such as
petroleum ether or modified petrol, to

clean inside the car. The electrostatic charges
which are generated by rubbing during cleaning
may cause a fire.  
Do not keep aerosol cans in the vehicle: these
could explode. Aerosol cans must not be exposed
to temperatures exceeding 50°C. When the vehi-
cle is exposed to sunlight, the temperature inside
can greatly exceed this value.

WARNING

SEATS AND FABRIC PARTS

Remove dust with a soft brush or a vacuum cleaner. It is
advisable to use a damp brush on velvet upholstery.
Wipe the seats with a sponge soaked in a solution of mild
detergent and water.

IMPORTANT The fabric upholstery of your car is designed
to withstand normal wear and tear for a long time. Some
precautions are needed though. Avoid prolonged and/or
excessive rubbing against clothing accessories such as met-
al buckles and Velcro strips which, by applying a high pres-
sure on the fabric in a small area, could cause some threads
to break, thereby damaging the upholstery.

PLASTIC PARTS

It is advisable to clean interior plastic parts with a damp
cloth and a solution of water and non-abrasive mild soap.
To remove grease and tough stains, use products designed
specifically for cleaning plastics. These have no solvents
and have been designed so that they do not alter the ap-
pearance and colour of the components.

IMPORTANT  Never use alcohol, petrols and derivatives
to clean the instrument panel lens.

REAL LEATHER STEERING WHEEL/GEAR
LEVER KNOB 

These components must be cleaned with mild soap and
water only.

Never use spirits and/or alcohol-based products. 

Before using off-the-shelf products designed for cleaning
vehicle interiors, make sure that they do not contain spir-
its and/or alcohol-based substances.

If window cleaner accidentally drips onto the steering
wheel or gear lever knob, wipe away immediately and then
wash the affected area with mild soap and water.

IMPORTANT When arranging a steering wheel locking
device, be careful not to damage the leather upholstery.

209-232 PUNTO EASY GB 1ed  07/04/14  10:12  Pagina 232

Summary of Contents for PUNTO 2012
















































































































































































































































































Reviews:

No comments

Related manuals for PUNTO 2012

JETBAG 320 Fitting Instructions Manual preview
320
Brand: JETBAG Pages: 44
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Safe Fleet PRIME DESIGN VRR-E-PM21 Assembly Instructions Manual preview
PRIME DESIGN VRR-E-PM21
Brand: Safe Fleet Pages: 12
Xblitz Mirror 2016 User Manual preview
Mirror 2016
Brand: Xblitz Pages: 30
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
Club Car TransPorter 4 Maintenance And Service Manual preview
TransPorter 4
Brand: Club Car Pages: 286
Magneti Marelli Obd Road User Manual preview
Obd Road
Brand: Magneti Marelli Pages: 9
Mitsubishi 2015 OUTLANDER Owner'S Manual preview
2015 OUTLANDER
Brand: Mitsubishi Pages: 490
Overland Outfitters SHERPA SADDLE BAG JL Installation Instructions preview
SHERPA SADDLE BAG JL
Brand: Overland Outfitters Pages: 2
STO N SHO SNS 297 Installation Procedures Manual preview
SNS 297
Brand: STO N SHO Pages: 7
Mid America Motorworks 602-781 Instruction Sheet preview
602-781
Brand: Mid America Motorworks Pages: 2
Waeco PerfectView CRT300 Installation And Operating Manual preview
PerfectView CRT300
Brand: Waeco Pages: 200
Snapper 63151 Parts Manual preview
63151
Brand: Snapper Pages: 8
Ratio Electric HOME BOX SMART Manual preview
HOME BOX SMART
Brand: Ratio Electric Pages: 16
Nav TV NTV-KIT041 Operation Instructions preview
NTV-KIT041
Brand: Nav TV Pages: 3
Chevrolet 2003 Malibu Owner'S Manual preview
2003 Malibu
Brand: Chevrolet Pages: 354
Kleinn RAMHDOBA-6450 Installation Instructions Manual preview
RAMHDOBA-6450
Brand: Kleinn Pages: 33
Kuda 079030 Installation Instruction preview
079030
Brand: Kuda Pages: 2

Brands by name

Popular brands

Load more brands