Fiat Linea Owner'S Handbook Manual Download Page 53

Page: 53 / 234

SAFETY

TING UP

AND DRIVING

ARNING

LIGHTS AND MESSAGES

SER

VICING

AND CARE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

IN AN

EMERGENCY

FAST PASSENGER
COMPARTMENT HEATING

For the fast heating of the passenger com-
partment, proceed as follows:

❒

turn the knob

to the red section;

❒

activate internal air recirculation;

❒

turn the knob

;

❒

turn the knob

(max. fan

speed).

Then use the controls to maintain the re-
quired comfort conditions and bring slid-
er

to turn air recirculation off

and to prevent misting.

IMPORTANT With a cold engine, you
have to wait for a few minutes to let the
system fluid reach optimum operating
temperature.

FRONT WINDOW
FAST DEMISTING/
DEFROSTING (WINDSCREEN
AND SIDE WINDOWS)

Proceed as follows:

❒

turn the knob

to the red

section;

❒

deactivate the internal air recirculation;

❒

turn the knob

;

❒

turn the knob

(max. fan

speed).

After demisting/defrosting, operate the
controls to restore the required comfort
conditions.

Window demisting

In the event of considerable external mois-
ture and/or rain and/or large differences in
temperature inside and outside the passen-
ger compartment, perform the following
preventive window demisting procedure:

❒

turn the knob

to the red section;

❒

deactivate the internal air recirculation;

❒

turn the knob

or to

if the

windows do not demist;

❒

turn the knob

to 2

speed.

044-090 LINEA EUROPA 2ed GB:044-090 LINEA 2ed it 28-03-2012 16:21 Pagina 52

Summary of Contents for Linea











































































































































































































































Search results

Summary of Contents for Linea

Reviews:

Related manuals for Linea

Brands by name

Popular brands

Fiat Linea, Owner'S Handbook Manual

Search results

Summary of Contents for Linea

Reviews:

Related manuals for Linea

Brands by name

Popular brands