35
SAFETY
ST
AR
TING UP
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SER
VICING
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
To cancel the setting, proceed as follows:
– briefly press
MENU ESC
: (On) will
flash on the display;
– press the button
−
: (Off) flashes on the
display;
– briefly press
MENU ESC
to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
Rain sensor sensitivity adjustment
(Rain sensor)
(for versions/markets, where provided)
This function allows you to adjust the rain
sensor sensitivity to 4 levels.
To set the required sensitivity level, pro-
ceed as follows:
– briefly press the button
MENU ESC
,
the previously set sensitivity “level” will
flash on the display;
– press the button
+
or
−
for setting;
– briefly press
MENU ESC
to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
Speed Beep (Speed limit)
This function is used to set the car speed
limit (km/h or mph); the driver is imme-
diately alerted when this limit is ex-
ceeded (see chapter “Warning lights and
messages”).
To set the desired speed limit, proceed as
follows:
– briefly press
MENU ESC
– the display
will show the wording (Speed Beep);
– press button
+
or
−
to select speed limit
activation (On) or deactivation (Off);
– if the function has been activated (On),
press buttons
+
or
−
to select the re-
quired speed limit and then press
MENU
ESC
to confirm.
Note
The speed may be set in the range
from 30 to 200 km/h, or from 20 to 125 mph
according to the previously chosen unit
(see “Setting the distance unit” paragraph)
described below. The setting will in-
crease/decrease by five units each time the
button
+
/
−
is pressed. Hold the button
+
/
−
down to increase/decrease the set-
ting rapidly and automatically. Complete
the setting by briefly pressing the button
when you approach the required value.
– briefly press the button
MENU ESC
to
return to the menu screen or hold the
button down to return to the standard
screen without saving.
032-043 LINEA 1ed EN:032-043 LINEA 1ed it 4-11-2010 16:18 Pagina 35