Fiat Case IH AFS Pro 600, Setup

Page: 29 / 51

29
Display Software Setup
(Product Setup)
ƒ
Go to Toolbox>Product
ƒ
Products define the products that are applied, which allows tracking of data by
product.
ƒ
They also define information used by controllers for application:
o
Product Form – The product is either liquid (gal/ac), granular (lb/ac), seed
(ksds/ac), bulk seed (lb/ac), plant (plants/ac), or other (lb/ac).
o
Default Application Rate – The default application rate that a controller uses when
the product is assigned. Pressing the Units Button in this window allows the
application rate units to be changed.
o
Minimum Application Rate – The minimum application rate that a controller uses
when the product is assigned. The controller cannot be set below the minimum
rate (unless it is shut off).
o
Maximum Application Rate – The maximum application rate that a controller uses
when the product is assigned. The controller cannot be set above the maximum
rate.
o
Delta Application Rate – The amount the application rate will change when the
application rate is incremented or decremented.
Table of Contents