Fiat Case IH AFS Pro 600, Setup

Page: 11 / 51

11
Display Software Setup
Step 2 continued: Setup Raven Options
o
SCS Series: Select the correct series from the pull-down list to match
the Raven System. There are communication interface differences
between series so it is important to select the correct series.
o
Use Work State: “Yes” for this option uses the Pro 600 Work State
(Work Control) to control application rate.
For information on Work
Control, click here.
¾
When the work state is “Off”, the Raven System is “shut off” by sending a
“zero” application rate. For Raven Systems with standard valves, this zero
rate will not actually force it to zero application rate. Instead, the Raven
System will beep to indicate that the master should be shut off.
¾
When the work state is “On”, the system sends the normal application rate,
which should be executed by the Raven System regardless of valve type.
Table of Contents