Fiat Case IH AFS Pro 600, Setup

Page: 16 / 51

16
Display Software Setup
(Raven Run Screen Windows)
ƒ
Step 3: Add Raven Run-Screen Windows (Toolbox>Layout)
o
Example “A:Raven Set 1”
o
“A:” – Denotes Com Port that Raven is connected to
o
“1/2/3” – Denotes which product the window is for
¾
Raven 100 Series (440, 450, 660 etc.) have single product control only—run screen
windows for products 2 and 3 will not apply
o
Master – Raven Master
¾
This does not actually control the Raven Master. For Standard Valve Systems the Pro 600
Display sends a rate of 0.1 to the Raven Controller when the Master Button is off (Raven
System will beep, but will not go the 0.1 rate). For Fast Close Valve Systems the Pro 600
Display sends a 0.0 rate to the Raven Controller when the Master Button is off, which
effectively shuts it off.
¾
A black “On” button indicates the master is on. A gray “On” button indicates the master is
off.
o
Set Rate – Raven Set
¾
This window shows the set application rate for the product being applied.
¾
Touching the rate window brings up the rate control screen.
o
Actual Rate – Raven Act
¾
This window shows the actual application rate as reported by the Raven System.
Table of Contents