3
.
If using another vehicle to jump start the battery, park the vehicle within the jumper
cables reach, set the parking brake and make sure the ignition is OFF
.
WARNING!
Do not allow vehicles to touch each other as this could establish a ground connection
and personal injury could result
.
Jump Starting Procedure
WARNING!
Failure to follow this jump starting procedure could result in personal injury or prop-
erty damage due to battery explosion
.
CAUTION!
Failure to follow these procedures could result in damage to the charging system of the
booster vehicle or the discharged vehicle
.
Connecting The Jumper Cables
1
.
Connect the positive
(+)
end of the jumper cable to the positive
(+)
post of the dis-
charged vehicle
.
2
.
Connect the opposite end of the positive
(+)
jumper cable to the positive
(+)
post of
the booster battery
.
3
.
Connect the negative
(-)
end of the jumper cable to the negative
(-)
post of the
booster battery
.
4
.
Connect the opposite end of the negative
(-)
jumper cable to a good engine ground
(exposed metal part of the discharged vehicle’s engine) away from the battery and the
fuel injection system
.
WARNING!
Do not connect the jumper cable to the negative (-) post of the discharged battery
.
The resulting electrical spark could cause the battery to explode and could result in
personal injury
.
Only use the specific ground point, do not use any other exposed metal
parts
.
WHAT TO DO IN EMERGENCIES
166
Summary of Contents for 500X2017
