270
SERVICING AND MAINTENANCE
(Continued)
If an examination of your engine compartment
shows no evidence of radiator or hose leaks,
the vehicle may be safely driven. The vapor will
soon dissipate.
Do not overfill the coolant expansion bottle.
Check the coolant freeze point in the radiator
and in the coolant expansion bottle. If engine
coolant needs to be added, the contents of
the coolant expansion bottle must also be
protected against freezing.
If frequent engine coolant additions are
required, the cooling system should be pres
-
sure tested for leaks.
Maintain engine coolant concentration at a
minimum of 50% OAT coolant (conforming to
MS.90032) and distilled water for proper
corrosion protection of your engine which
contains aluminum components.
Make sure that the coolant expansion bottle
overflow hoses are not kinked or obstructed.
Keep the front of the radiator clean. If your
vehicle is equipped with air conditioning,
keep the front of the condenser clean.
Do not change the thermostat for Summer or
Winter operation. If replacement is ever
necessary, install ONLY the correct type ther
-
mostat. Other designs may result in unsatis
-
factory engine cooling performance, poor gas
mileage, and increased emissions.
B
RAKE
S
YSTEM
In order to ensure brake system performance,
all brake system components should be
Brake Master Cylinder
The fluid level in the master cylinder should be
checked when performing under hood services,
or immediately if the “Brake Warning Light” is
on.
Be sure to clean the top of the master cylinder
area before removing the cap. If necessary, add
fluid to bring the fluid level up to the
requirements described on the brake fluid
reservoir. Fluid level can be expected to fall as
the brake pads wear. The brake fluid level
should be checked when the pads are replaced.
However, low fluid level may be caused by a
leak and a checkup may be needed.
Use only manufacturer's recommended brake
WARNING!
Riding the brakes can lead to brake failure
and possibly a collision. Driving with your foot
resting or riding on the brake pedal can result
in abnormally high brake temperatures,
excessive lining wear, and possible brake
damage. You would not have your full braking
capacity in an emergency.
WARNING!
Use only manufacturer’s recommended
page 315. Using the wrong
type of brake fluid can severely damage
your brake system and/or impair its perfor
-
mance. The proper type of brake fluid for
your vehicle is also identified on the original
factory installed hydraulic master cylinder
reservoir.
21_FD_OM_EN_USC_t.book Page 270
