IN CASE OF EMERGENCY
239
P
REPARATIONS
F
OR
J
ACKING
1. Park on a firm, level surface. Avoid ice or
slippery areas.
2. Turn on the Hazard Warning Flashers.
3. Apply the Electric Park Brake.
4. Place the gear selector into PARK (P).
5. Turn the ignition to STOP mode.
6. Block both the front and rear wheel
diagonally opposite of each jacking
position. For example, if the driver’s front
wheel is being changed, block the
passenger’s rear wheel.
Wheels Chocked
NOTE:
Passengers should not remain in the vehicle
when the vehicle is being raised or lifted.
J
ACK
L
OCATION
/S
PARE
T
IRE
S
TOWAGE
— I
F
E
QUIPPED
The jack and tools are located in the rear
storage compartment, under the load floor.
Jack And Tools Location
1. Open the liftgate.
2. Lift the access cover using the load floor
handle.
Load Floor Handle
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic. Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
7
21_FD_OM_EN_USC_t.book Page 239
