GEAR SELECTOR OVERRIDE
If a malfunction occurs and the gear selector cannot be moved out of the PARK position,
you can use the following procedure to temporarily move the gear selector:
1
.
Turn the engine OFF
.
2
.
Firmly apply the parking brake
.
3
.
Remove the gear selector override access cover (located on the right side of the gear
selector housing) by prying at the bottom edge of the cover
.
4
.
Press and maintain firm pressure on the
brake pedal
.
5
.
Insert a small screwdriver or similar tool
into the access hole, and push and hold
the override release lever in
.
6
.
Move the gear selector to the NEU-
TRAL position
.
7
.
The vehicle may then be started in
NEUTRAL
.
8
.
Reinstall the gear selector override ac-
cess cover
.
Gear Selector Override Access Hole
WHAT TO DO IN EMERGENCIES
127
Summary of Contents for 500c 2017
