Fiat 500c 2017, User Manual

Page: 76 / 180

Clock Setting
To start the clock setting procedure:
1 . Push the Settings button on the faceplate and then press the “Clock and Date” button
on the touchscreen
.
2
.
Press the “Set Time” button on the touchscreen
.
3
.
Press the “Up” or “Down” arrows to adjust the hours or minutes, then select the
“AM” or “PM” button on the touchscreen
. You can also select 12hr or 24hr format by
pressing the desired button on the touchscreen .
4
.
Once the time is set, press the “Done” button on the touchscreen to exit the time
screen
.
NOTE:
In the Clock Setting Menu you can also select Display Clock
.
Display Clock turns the
clock display in the status bar on or off
.
Equalizer, Balance And Fade
1 . Push the Settings button on the faceplate .
2 . Scroll down and press the “Audio” button on the touchscreen to open the Audio
menu
.
3
.
The Audio menu shows the following options for you to customize your audio set-
tings
.
Equalizer
Press the “Equalizer” button on the touchscreen to adjust the Bass, Mid and Treble
.
Use
the “+” or “-” button on the touchscreen to adjust the equalizer to your desired settings .
Balance/Fade
Press the “Balance/Fade” button on the touchscreen to adjust the sound from the speak-
ers
. Use the arrow buttons on the touchscreen to adjust the sound level from the front
and rear or right and left side speakers . Press the Center “C” button on the touchscreen
to reset the balance and fade to the factory setting
.
Speed Adjusted Volume
Press the “Speed Adjusted Volume” button on the touchscreen to select between OFF, 1,
2 or 3
. This will decrease the radio volume relative to a decrease in vehicle speed .
Surround Sound
Press the “Surround Sound” button on the touchscreen, select On or Off followed by
pressing the back arrow button on the touchscreen
. When this feature is activated, it
provides simulated surround sound mode
.
ELECTRONICS
74