FI-FIELDS JETTY, Owner'S Manual

Page: 21 / 26

INSTRUCTIONS FOR USE
17
Fifield is not responsible for any
damages caused by use of other
products not specifically designed
and tested for use with this electric
bicycle.
The battery chargers contain
sensitive electronics. Improper
use, dropping, or sudden jolts can
damage the charger and its
internal electronics.
Charging the battery
It is important that you charge
your battery after every use. This
will extend the total life of your
battery.
Because specifications of the
charger may change in the process
of production, please read the
charger manual in detail before
use.
How to charge
To charge, turn the bike off
and insert the plug of the charger
into the charging port. This can be
found on the left side of the main
bike frame. Simply remove the
black rubber cover to access the
power outlet (depicted at the end
of this section). Once this is
complete, insert the charger into
the electrical outlet.
The standard 120V wall outlet in
most homes is sufficient power to
charge the battery.
The light on the battery
charger will appear RED to show
that is not full. A full recharge
typically takes 4 – 5 hours. When
the battery is full, the light will
change from red to GREEN. You
can continue to charge for 1 – 2
more hours after it turns green.
Unplug the power source from
the battery and then from the
electrical outlet. Store the charger
in a cool, dry place.
NOTE: After the light turns green,
the charger is in “trickle charge.”
This means that if plugged in, it will
continue to charge slowly and
maintain the charge. Doing this will
not harm the battery. For safety
and long battery life, unplug the
battery if you are going to be gone
for an extended period of time.
Do not leave the charger plugged
into the battery for more than 10
hours to avoid overcharging and
WARNING
DO NOT use chargers or other
components on your e-bike other
than the ones which have been
approved and tested by this
company.