FI-FIELDS JETTY, Owner'S Manual

Page: 19 / 26

INSTRUCTIONS FOR USE
15
Battery Indicator
The five battery bars represent
the capacity of the battery. When
the battery is low the battery
frame on screen will flash to notify
that it needs to be recharged
immediately.
Error Code Information
If an error code appears, take
note of what code is displayed.
Contact a service center to get
your bicycle repaired. An error
code will be displayed in the
bottom right corner in place of the
normal “WATT” display.
For more information on the LCD
screen, refer to our website to
download the extended version of
the manual.
Pedal assistance
Your pedal assist will start
once you start to pedal and stop
once you stop peddling. You are
able to adjust the amount of
assistance on the LCD screen by
adjusting the + / - button. If you do
not want any assist, bring your
bike to a stop and power off the
system. If the handbrakes are
applied, the pedal assist will cut
automatically. You do not need to
turn the power off when going
downhill.
Throttle
The throttle is located on the
left side of your handlebars. It is a
one speed throttle which does not
engage unless the bike is pedaled
to engage the motor, and then the
throttle can be used and pedaling
can stop. To engage the throttle,
turn the throttle towards you
while seated on the bike. There is
an automatic SHUT OFF of the
throttle on the brake levers. Every
time the brake lever is pressed, the
power from the motor is
disconnected.
Gears
There are 7 external gears on
your bicycle. The gears are located
on the right side of your
handlebars. In order to shift
between gears, simply move the
shifter up and down until you find
a suitable gear to ride in.
Battery
The battery supplied is the top
quality 10.4 amp Lithium Battery
and was designed specifically for
this electric bicycle. The battery is
sealed safely within the frame of