ASSEMBLY
9
1.
Handlebars:
When your e-bike is first shipped the handlebars be
properly attached, but in the folded position. This can be seen in the
left side image. There are two steps to resolve this. First, simply
straighten the handlebar frame until it is perpendicular to the
ground. When this is complete, use the metal clasp on the side of the
frame to lock the collapsible joint in place. If done properly, there
should be no movement of the handlebars.
Next, use the depicted tool below to loosen the 2 screws on the
handlebar clamp just enough for you to roll the handlebars toward
the seat until they are in the correct position (shifters facing you at
the fight level and the LCD facing up toward your face). Make sure to
then tighten down the screws.
Summary of Contents for JETTY
Page 7: ...3 ...
Page 26: ...22 Welcome to the family ...
