ASSEMBLY
10
2.
Frame:
In addition to the handlebars being out of place, the middle of
the bike will also be in the collapsed. To correct this, simply unfold
the bike until the frame is perfectly straight and use the metal clasp
on the frame to lock the joint together. Once closed make sure to
push in the black lock found above the clasp (shown in the image on
the right. There should be no movement at the collapse point if done
properly.
3.
Pedals:
The pedals will come in their own wrapping. Once unwrapped
look inside the threaded section to determine what side of the bike
the pedal goes on (depicted below). Attach the pedals by putting a
washer on the threaded part o the pedal and using the provided
wrench to tighten the pedals in their place. The pedals are also
collapsible for ease of storage. To do this, simply push the pedal
inwards and fold it either up or down. This is best done using your
foot.
Summary of Contents for JETTY
Page 7: ...3 ...
Page 26: ...22 Welcome to the family ...
