Go to fetco.com for the latest version of all information Part B page
3
P123 partB REV 002 Technical Supplement March, 2016
Specifications and Requirements
Water Requirements:
Coffee Filter Size:
CBS-2130XTS: 20-75 psig, (138-517kPa) 1½gpm/(5.7lpm)
13” X 5”” – standard FETCO # F002
Water supplied to hot beverage equipment should be filtered
Water supplied Hardness >100 TDS (5.5 grain)
Electrical:
See electrical configuration chart.
Water inlet fitting
is a 3/8 inch male flare.
Temperature, as set by factory:
Brew Volume: Full Batch
Up to 1 gallon/3.8 liters per brew
200°F (93°C) inside water tank (at sea level)
Total Brew Cycle—
Factory setting: 5.5 minutes=[4 minute brew time + 1.5 minute drip delay]
.
Specifications-Electrical and Output Configurations
For qualified service technicians
These specifications apply to FETCO CBS-2131XTS & CBS-2132XTS manufactured as of January 2016
CBS-2130XTS USA and Canada
CBS_2131XTS—Single
Single-Voltage
Cord and Plug/Two wire electrical
Configuration
Codes
Heater
Configuration
Voltage Phase Wires
Electrical
Connection
KW
Amp
Draw
Brew-Volume/Hour
(3 liters per batch)
E213153
1 X 1.5 kW 100 - 120
1
2+G
NEMA 5-15P
1.6
13.0 3.9 gal/14.8 liters
E213151
1 X 2.3 kW 100 - 120
1
2+G
NEMA 5-20P
2.4
19.7 5.8 gal/22 liters
E213157
1 X 3.0 kW 200 - 240
1
2+G
NEMA 6-15P
3.1
13.0 7.7 gal/29.1 liters
.
.
CBS_2131XTS—Single
Field configurable, Dual-Voltage Three wire plus ground electrical
Configuration
Codes
Heater
Configuration
Voltage Phase Wires
Electrical
Connection
KW
Amp
Draw
Brew-Volume/Hour
(3 liters per batch)
E213172
1 X 1.7 kW
120
1
2+G
NEMA 5-15P
1.8
14.7
4.4 gal/16.7 liter
(*Optional)
2 X 1.7 kW (120/208-240)
1
(3+G)
Hardwire
L1,L2,N+G
3.5
14.7
8.7 gal/33 liter
E213173
1 X 2.3 kW
120
1
2+G
NEMA 5-20P
2.4
19.7
5.8 gal/22 liter
(*Optional)
2X 2.3 kW (120/208-240)
1
(3+G)
Hardwire
L1,L2,N+G
4.7 19.7 11.0gal/41.6
liter
*
Sold with factory cord & plug for 120 Volt configuration. Optional user connection to a terminal block requiring L1, L2, N and ground to120/208-240 VAC
User selectable for optional, dual in-series heater configuration: DO NOT WIRE L2 to nuetral. The optional configuration requires three wire plus ground.
.
SEE WIRING DIAGRAMS AT BACK OF THIS GUIDE
CBS_2132XTS—Twin
Single-Voltage
Configuration
Code
Heater
Configuration
Voltage Phase Wires
Electrical
Connection
KW
Amp
Draw
Brew-Volume/Hour
(3 liters per batch)
E213251
2 X 2.3 kW
200-240
1
2+G
Terminal Block
4.7
19.7 11.5 gal/43.5
E213252
2 X 3.0 kW
200-240
1
2+G
Terminal Block
6.1
25.5 14.0 gal/53 liters
Please see wiring diagrams located in back pages for installation notes.
CBS-2131XTS From Factory
120 volt models
CBS-2131XTS *Field installed Option
120/208-240 volt models
(one)CBS-2131XTS and
(all)CBS-2132XTS
200-240 volt L1, L2,G models
All CBS 2131XTS
OPTIONAL 2 HEATER ONLY
SKU
E213151; E213153
SKU
E213172; E213173
SKU
E213172; E213173
SKU
E213157; (single) .
SKU
E213251 E213252 (dual)
G
W
G
W
NEMA PLUG CONFIGURATION
NEMA 5-15P NEMA 5-20P NEMA 6-15P
1
