Go to fetco.com for the latest versions of all information
Page 2
User Guide & Operator instructions
P209
Re0
August 2021
Specifications and Requirements
Water Requirements:
Electrical: Supplied with 120V cord & plug
Water inlet fitting is a 1/4 inch male flare.
(Page 16)
Pressure: 20-75 psig, (138-517kPa) 1½gpm/(5.7lpm)
For Iced tea: brewer is factory calibrated to a non-fluctuating
stable water supply pressure at 45 psi.
Tank Temperature, as set by factory:
200°F (93°C) inside water tank (at sea level)
Iced Tea Batch Temperature-user adjustable
200°F-207°F-/ 93°-98°C
Water supply: (Optimal) 100-150TDS
All beverage equipment must use filtered water
Brew Volume-Iced Tea: Full Batch 3 gallons/11.40 liters
User adjustable to up to 4.9 gallon/18.7 liters per brew
Brew batch and dilution ratio user adjustable
Iced Tea Dilution Ratio: 1:4 factory set brew to water
Factory setting adds 2.4 gallons of cold water to 0.6 gallon
brew for a 1:4 ratio Iced tea
(2.3liter brew/9.1 liter dilution)
Dilution volume is user adjustable from 0-4Gal;0-15.2L
Total Brew Cycle—Iced Tea-(Batch 1)
6:45 minutes=[3:00 minute brew time + 1:30 minute drip delay + 0:10 dilution delay + 3:35 dilution]
Batch 2 and batch 3 may be enabled and will set by machine for batch 1 by default or as defined by user
Brew-Process parameters are user controllable for: Brew Volume, Brew Time, Prewet Percent and Delay,
Drip Delay, Tea Batch Temperature, Dilution Volume and Dilution Timing (with brew or after brewing)
Coffee Filter FETCO# F001 or 15” X 5 ½ ”
Dose: 2.5 oz to 4.0 oz
Single dilution brewer has a s
quare plastic brew basket with set of nine orifices
Electrical Specifications for single domestic- 120 volt cord and plug
SKU
Dilution
Electrical
Connection
Heater
Configuration Voltage KW Amp Draw
Est.3gal
Batches/Hour
T1221US-1A117-PM001
Domestic
Single
NEMA 15-5P
1 X 1.7 kW 100-120 1.2-1.7 12.3-14.7
6
Electrical Specifications for single International-
CEE 7/7 “Shucko” cord and plug
SKU
Dilution
Electrical
Connection
Heater
Configuration Voltage KW Amp Draw
Est. 11.4 L
Batches/Hour
T1221IN-1B130-PN005
Single
CEE 7/7
1 X 3.0 kW 200-240 2.1-3.0 10.9-13.0
8-9
T1221CE-1B130-PN005 CE
Single
CEE 7/7
1 X 3.0 kW
230
2.8
12.5
9
Dual dilution brewer has a round brew basket to change the brew position from left to right for the dual dilution option.
Note: The “D” in the SKU is for dual-dilution.
Electrical Specifications for Dual domestic- 120 volt cord and plug
(Round plastic brew basket with set of nine orifices)
SKU
Dilution
Electrical
Connection
Heater
Configuration Voltage KW Amp Draw
Est.3gal
Batches/Hour
T122DUS-1A117-PN001
Domestic
Dual
NEMA 15-5P
1 X 1.7 kW 100-120 1.2-1.7 12.3-14.7
6
Electrical Specifications for Dual International- CEE 7/7 “Shucko” cord and plug
SKU
Dilution
Electrical
Connection
Heater
Configuration Voltage KW Amp Draw
Est. 11.4 L
Batches/Hour
Dual
CEE 7/7
1 X 3.0 kW 200-240 2.1-3.0 10.9-13.0
8-9
T122DCE-1B130-PN005 CE
Dual
CEE 7/7
1 X 3.0 kW
230
2.8
12.5
9
Weights and Capacities
Model
Height
Width
Depth
Water tank
capacity
Empty
Weight
Filled
Weight
Shipping
Weight
Shipping Dimensions
TBS-1221
Brewer
36 5/8 in
930 mm
9 1/4 in
235 mm
22 in
560 mm
2.7 gallon
10.1 L
35 lbs
15.9 kg
60 lbs.
27.2 kg
50 lbs.
22.7 kg
39 x 27” x 11.5”
991mmX686X292mm
TBS-1222
Brewer
36 5/8 in
930 mm
9 1/4 in
235 mm
22 in
560 mm
2.7 gallon
10.1 L
37 lbs
16.8 kg
62 lbs.
28.1 kg
52 lbs.
23.6 kg
39 x 27” x 11.5”
991mmX686X292mm
