Fetco CBS-1221 Plus, Users Manual And Operator Instructions

Page: 5 / 17

Go to fetco.com for the latest versions of all information
Page 5 User Guide & Operator instructions P194 Re0 January 2021
A PROGRAM Menu Features: Batch Parameters
The settings below are shown for the top batch on a single brewer top left button on a twin brewer.
See how to access all A menus on the previous page. Below are the brew settings for default A1 & A2 batches
POSITION Program Items Factory set Default Programming Range Increments Notes
A11 Batch Volume
2.20liters
0.58gal
0.95 to 3.25L
0.25 to 0.85 gal
0.05L
0.01G
Unit software is in liters;
Can convert to gallon
A12
Brew Time
(MIN:SEC)
3:30 minutes 2:00 – 12:00 15 sec
Default total brew time is
6:00 minutes
A13 Prewet Perc. 0% 0.00 – 25.0% 1%
Percentage of total brew
volume
A14
Prewet Delay
(Pause after prewet
completes)
0% [1:00 Min] [0:10 – 5:00] 10 sec
The time between
prewetting and start of
brew cycle.
This feature appears
ONLY if Prewet >0:00
A16 Drip Delay 1:30 mm:ss 0:30 – 6:00 min. 10 sec
Time brew basket should
remain in place during final
drip-out

Drip delay remains “ON” for
2:00 minutes if STOP is
pressed during brew
†
To access programming steps A20 and A30
Batch programming steps A20 or A30 will not display from step A10
Programming for steps A20 and A30 are accessed from any step in A10 by pressing the STOP button (1x for A20;2x for A30).
A20
Batch Enabled
A20 YES -
NO +
YES
(Active)
Middle and Bottom
batches A2,A3
Batch on or
off
Batches may be
individually enabled,
rewritten or deactivated
A21 Batch Volume
1.90liters
0.58gal
0.95 to 3.25L
0.25 to 0.85 gal
0.05L
0.01G
Unit software is in liters;
converts to gallon
A22
Brew Time
(MIN:SEC)
3:00 minutes 2:00 – 12:00 15 sec
Default total brew time is
6:00 minutes
A23 Prewet Perc. 0% 0.00 – 25.0% 1%
Percentage of total brew
volume
A24
Prewet Delay
(Brew pause after
prewet completes)
0% [1:00 Min] [0:10 – 5:00] 10 sec See Note A14
A26 Drip Delay 1:30 mm:ss 0:30 – 6:00 min. 10 sec

See Note A16
A30
Batch Enabled
A30 YES -
NO
+
YES
(Active)
Middle and Bottom
batches A2,A3
Batch on or
off
Batches may be
individually enabled,
rewritten or deactivated
A90
Batch Copy
A91
Batch Copy
Copy From Batch 1 + A91 1 (1-6) Select recipe to copy
A92
(PASTE TO)
Paste To Batch? 1 + A92.1 (1-6) Select where to paste
A11 Single Topmost Batch cannot be disabled. A21 & A31 middle and bottom batches may be disabled.
† DRIP DELAY will not activate when STOP is pressed within 5 seconds of starting a brew time
.