MS6-SV-...-D-10V24
Festo – MS6-SV-...-D-10V24 – 1702a English
21
7.3
Electrical installation
Caution
Only use power sources which guarantee reliable electrical isolation of the operating
voltage in accordance with EN/IEC 60204-1. Observe also the general requirements for
PELV circuits in accordance with EN/IEC 60204-1.
Note
Long signal lines pick up more interference.
Make sure that the signal lines are always shorter than 20 m.
The signal lines must be run separate from lines that emit interference, in accord
ance with EN/IEC 60204-1.
Note
The internal valves are sensed magnetically.
Make sure that there is no magnetic interference at the MS6-SV-D.
Observe enclosed operating instructions for proximity sensors.
Connecting the MS6-SV-D
Connect pilot valves and proximity sensors.
