MS6-SV-...-D-10V24
Festo – MS6-SV-...-D-10V24 – 1702a English
17
7
Installation
7.1
Mechanical installation
Note
To avoid damaging the connected lines, note the following points:
Use mounting parts (e.g. mounting brackets MS6-WP).
Note
Failure of the safety function
The safety function of pressure release might fail if the distance between the pneumatic
silencer and base is not at least 15 mm.
Observe minimum distance of 15 mm below the pneumatic silencer (
è
Fig. 6).
The open space ensures trouble free exhausting.
Information about mounting the module connector, sub-base and mounting bracket can
be found in the operating instructions enclosed with the relevant accessories.
Fig. 6
Installation
