background image

8

a state of readiness by float charging

conservation.

• Do not keep discharged battery pack

(maximum one month) attached to charger

whenever charger is detached from the

power supply (danger of deep discharging).

• A new battery pack or a battery pack not

used for a longer period of time reaches it's

full capacity after about 5 charging and

discharging cycles.

• Battery packs should, before charging, be

fully discharged if possible. Continuous

starting of the charging process shortens the

lifespan of the batteries.

• A considerably reduced time of operation per

charging shows that the battery pack is used

up an should be replaced by a new one.

• Store battery packs at ambient temperatures

between 0°C and 35°C.

• All maintenance and repair work, requiring

dismantling of equipment, may only be

performed by an authorised after-sales

service workshop.

Recycling battery packs

Never throw spent battery packs into

domestic waste containers! Return spent or

defective battery packs to dealers, the Festool

after-sales service department or approved

waste disposal facilities. This ensures that they

are correctly recycled.

Warranty

Conditions of 1+2 Warranty

You are entitled to a free extended warranty

(1 year + 2 years = 3 years) for your Festool

power tool. Festool shall be responsible for all

shipping costs during the first year of the

warranty. During the second and third year of

the warranty the customer is responsible for

shipping the tool to Festool. Festool will pay for

return shipping to the customer using UPS

Ground Service. All warranty service is valid 3

years from the date of purchase on your receipt

or invoice.

Festool Limited Warranty

This warranty is valid on the pre-condition that

the tool is used and operated in compliance

with the Festool operating instructions. Festool

warrants, only to the original consumer

purchaser, that the specified tool will be free

from defects in materials and workmanship for

a term of one year from the date of

procurement. Festool makes no other warranty,

express or implied, for Festool portable power

tools. No agent, representative, distributor,

dealer or employee of Festool has the authority

to increase or otherwise change the obligations

or limitations of this warranty. The obligations

of Festool in its sole discretion under this

warranty shall be limited to the repair or

replacement of any Festool portable power tool

that is found to be defective as packaged with

the User Manual.
Excluded from coverage under this warranty

are: normal wear and tear; damages caused

by misuse, abuse or neglect; damage caused

by anything other than defects in material and

workmanship. This warranty does not apply to

accessory items such as circular saw blades,

drill bits, router bits, jigsaw blades, sanding

belts, and grinding wheels. Also excluded are

“wearing parts”, such as carbon brushes,

lamellas of air tools, rubber collars and seals,

sanding discs and pads, and batteries.
Festool portable power tools requiring

replacement or repair are to be returned with

the receipt of purchase to Festool (call 800-

554-8741 for address details).
IN NO EVENT SHALL FESTOOL BE LIABLE

FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY,

EXPRESSED OR IMPLIED WHATSOEVER.

ALL WARRANTIES IMPLIED BY STATE

LAW, INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE,

ARE HEREBY LIMITED TO THE DURATION
OF THREE YEARS.
Some states in the U.S. and some Canadian

provinces do not allow the limitations on how

long an implied warranty lasts, so the above

limitation may not apply to you. With the

exception of any warranties implied by state or

province law as hereby limited, the foregoing

express limited warranty is exclusive and in lieu

of all other warranties, guarantees, agreements

and similar obligations of Festool.
This warranty gives you specific legal rights and

you may also have other rights which vary from

state to state in the U.S. and province to

province in Canada.

Summary of Contents for CDD 12























Reviews: