SFE1−LF−...
Festo SFE1−LF−... 0503NH English
47
R
E
C
O
R
DE
R
m
o
d
e
Enables manual accumulative consumption measurement (only when Out A is in
the [Flow] mode); select the [Flow] mode before the manual consumption measure
ment in the EDIT mode for Out A (see under EDIT mode).
1. In order to activate the EDIT mode, press the EDIT button.
2. Only with active security blocking [lock]:
S
Press the UP/DOWN button until the desired security code is set.
S
Press the EDIT button.
[Out A] flashes.
3. Press the UP/DOWN button until the RECORDER mode is selected ([RESET],
[STOP] and [RUN] flashes).
4. In order to activate the RECORDER mode, press the EDIT button.
S
t
a
rt the
m
e
asu
re
m
ent
5. Select [RUN] with the UP/DOWN button (RUN flashes).
6. In order to confirm, press the EDIT button (recording starts, running light
1segment).
A flashing RUN indicates that an accumulative consumption measurement has
been started and is active in the RECORDER mode, even when the RECORDER
mode has been exited.
S
top the
m
e
asu
re
m
ent
7. Select [STOP] with the UP/DOWN button (STOP flashes).
8. In order to confirm, press the EDIT button (recording stops).
I
n or
d
er to re
s
et the
m
e
asu
re
d
v
a
l
u
e
9. Select [RESET] with the UP/DOWN button (RESET flashes).
10. In order to confirm, press the EDIT button (measured value will be reset).
T
e
s
t r
u
n
S
Carry out a test run with various flows or consumption to ascertain whether the
SFE1−LF−... switches as desired.
Summary of Contents for SFE1-LF F10 Series
