Festo SFE1-LF F10 Series, Operating Instructions Manual, Page: 34 / 60

SFE1−LF−...
Festo SFE1−LF−... 0503NH English
34
3 Con d ition s o f us e
Wa rnin g
The product may become damaged if it is used in conjunction with non−
permitted media.
S
Do not use the product in conjunction with inflammable gases, corrosive
gases, oxygen etc. The product is intended only for measuring the flow of
media, which are listed in the technical specifications as being suitable.
Wa rnin g
Condensation water, oil mist, foreign matter and other dirt in the compressed
air can daamge the product and cause incorrect measurements and functional
disorders.
S
Make sure that the following grade of filtration is reached on the supply air
side: compressed air (no aggressive gases) class 341 as per DIN ISO 8573−1
(5m residual dust, + 3 °C pressure dew point, 0.01 mg/m´ residual oil
content).
Wa rnin g
Depending on the functionality of the machine/system, the manipulation of
signal states can cause serious injury to human beings and damage to property.
S
Note that if the switching status of the outputs is modified in Edit mode, the
new status will be effective immediately.
Activate the password protection (security code) in order to prevent uninten
tional modification by unauthorised third parties (see section 5 under Lock
mode).