Festo SBOC-M-R1B-H, Manual

Page: 35 / 88

2. Mounting
2-7
Festo GDCS-SBOC-EN en 1602a
Dismounting the shield tube
On the support ring of the protective tubing (see Fig. 1/2,
1
),
there is a hole with a diameter of 2.5 mm. There you can in­
sert a pin for counter pressure, as required, if you wish to
disconnect the shield tube (see Fig. 1/2,
2
) from the sup­
port ring.
Insert a pin for counter pressure into the hole of the sup­
port ring, as required.
Turn the shield tube anti-clockwise out of the fixture and
pull it forwards.
Dimantling the lens
Turn the lens anti-clockwise and pull it forwards out of the
fixture.
Attach the protective cover to the lens and the camera
housing.