manualshive.com logo in svg

Festo SBOC-M-R1B-H, Manual

Share
Download
Festo SBOC-M-R1B-H Manual Download Page 11

Contents and general instructions

IX

Festo GDCS-SBOC-EN  en 1602a

Important user instructions

Danger categories

This description includes instructions on the possible dangers
which can occur if the product is used incorrectly. These in­
structions are marked with a signal word (Warning, Caution,
etc.), printed on a shaded background and marked addition­
ally with a pictogram. A distinction is made between the fol­
lowing danger warnings:

Warning

... means that failure to observe this instruction may result
in serious personal injury or material damage.

Caution

... means that failure to observe this instruction may result
in personal injury or material damage.

Note

... means that failure to observe this instruction may result
in material damage.

In addition, the following pictogram marks passages in the
text which describe activities with electrostatically sensitive
devices:

Electrostatically sensitive devices: Incorrect handling may
cause damage to devices.

Summary of Contents for SBOC-M-R1B-H

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands