Festo MPA-L Series, Description

Page: 117 / 160

5. Conversion and maintenance
5−17
Festo P.BE−MPAL−EN en 1008NH
Right−hand end plate without lateral ports
Proceed as follows when converting:
1. Loosen the screws of the selector plate so that the guide
bolts are released and the selector plate can be turned
(see Fig.5/6).
Fig.5/6: Conversion of the round selector plate
2. Turn selector plate to position Int" or Ext" and put on
the end plate taking into account the guide bolts.
3. Tighten screw (torque 3.5Nm ±10%).
Right−hand end plate with lateral ports
Proceed as follows when converting:
1. Unscrew the screws of the selector plate (see Fig.5/7)
and remove selector plate.