Festo MPA-L Series, Description

Page: 110 / 160

5. Conversion and maintenance
5−10
Festo P.BE−MPAL−EN en 1008NH
Setting up the valve
terminal MPA−L Tie rod system Extension possibilities of
the valve terminal
Standard set up
At least four sub−bases,
right−hand end plate with lat
eral ports or at least two
sub−bases, pneumatic sup
ply plate and right−hand end
plate. Threaded rod
Threaded sleeve
Tie rod screw See chapter 5.3.2.
Special solutions
Two sub−bases, right−hand
end plate with lateral ports Use only tie rod screw One sub−base, one extension
piece
For extension by more than
one sub−base/supply plate the
extension pieces must be re
placed by the standard setup.
Three sub−bases, right−hand
end plate with lateral ports One extension piece
One tie rod screw For extension by one or more
sub−base/supply plates the
extension pieces must be
replaced by the standard setup.
Tab.5/2: Standard setup of the tie rod system and special solutions for short valve
terminal MPA−Ls with extension possibilities