9. Commissioning
48
© Festo Didactic GmbH & Co. KG • LOGO! EduTrainer
®
TP
The LOGO! EduTrainer
®
TP is generally delivered
•
fully assembled
•
commissioned
•
tested
Commissioning is normally limited to a visual check to ensure correct
wiring and supply of operating voltage.
A visual check must be carried out before each commissioning.
Incorrect use of electrical voltages can cause serious injury to trainees
and damage to the LOGO! EduTrainers
®
TP and connected components.
To prevent this, the following notes on safety must be observed at all
times.
•
Work on the LOGO! EduTrainer
®
TP, i.e. the disconnection of
electrical connections, must only be carried out when power is
disconnected.
•
Any voltages conducted in the LOGO! EduTrainer
®
TP, including in
the case of subsequent expansion, must not exceed 24 V DC at any
time.
9.1
Notes on safety
