8. Design and function
44
© Festo Didactic GmbH & Co. KG • LOGO! EduTrainer
®
TP
The following components are not included in the scope of delivery:
•
LOGO! PC cable, Order No. 526504
•
LOGO!Soft Comfort, Order No. 526505
•
Power supply unit 24 V DC
The LOGO! EduTrainer
®
TP is supplied fully assembled and tested.
The voltage supply to the LOGO! EduTrainer
®
TP still needs to be
established. The voltage supply must be effected via an external 24 V
DC source, for which the power supply units from Festo Didactic are
suitable. These are available in the form of function card variants for the
ER cabinet frame or as a table variant.
The LOGO! EduTrainer
®
TP can be used as follows:
•
In the cabinet frames of the Festo Didactic Learnline system,
•
On the blue plug-in board,
•
On the slotted assembly board or
•
As a table variant.
4 adapters, Order No. 323 571, are required for use on the slotted
assembly board.
LOGO! consists of
•
One interface to the process
•
One interface to the programming system LOGO!Soft Comfort/for
the plugging in of program modules
8.2
Wiring of the LOGO!
EduTrainer
®
TP
8.3
Installation of the LOGO!
EduTrainers
®
TP
8.4
Interfaces to the LOGO!
EduTrainer
®
TP
