HMP−...−B−...−Z..−...
Festo HMP−...−B−...−Z..−... 0412NH English
19
3
Conditions of use
Please note
The intermediate position module modifies the permitted technical data of the
linear module.
S
Compare the operating instructions for the HMP−...−B−... and for the
HMP−...−B−...−Z..−....
The values in the narrower range are valid.
S
Observe the notes on using the product in the operating instructions for the
HMP−...−B−....
4
Fitting
Fitting mechanical components
Please note
S
Consider the following possibilities for fine adjustment.
Adjusting element
Position in the positioning path
Unscrew the end stop
End position
Unscrew the shock absorber sleeve
Intermediate position
Fig.3
Please note
S
Make sure that the stop and the shock absorber sleeve are screwed in fully.
Otherwise, it is only possible to accurately adjust the intermediate position
and the end position to a limited extent. If necessary, loosen the clamping
screws and screw in the shock absorber / stop fully again.
